No Access

Static shape control for adaptive wings

Fred Austin

Grumman Corporate Research Center, Bethpage, New York 11714

Search for more papers by this author

Michael J. Rossi

Grumman Corporate Research Center, Bethpage, New York 11714

Search for more papers by this author

William Van Nostrand

Grumman Corporate Research Center, Bethpage, New York 11714

Search for more papers by this author

Gareth Knowles

Grumman Corporate Research Center, Bethpage, New York 11714

Search for more papers by this author

and

Antony Jameson

Princeton University, Princeton, New Jersey 08544

Search for more papers by this author

Published Online:17 May 2012https://doi.org/10.2514/3.12189

See PDF for references

Cited by
- Shape control of moderately thick piezoelectric beams
  31 March 2023 | Acta Mechanica, Vol. 234, No. 8
- Active shape control for flexible space structures using an optimal gyricity distribution
  Advances in Space Research, Vol. 71, No. 1
- Material and strain sensing uncertainties quantification for the shape sensing of a composite wing box
  Mechanical Systems and Signal Processing, Vol. 160
- Two Actuation Methods for a Complete Morphing System Composed of a VGTM and a Compliant Parallel Mechanism
  5 March 2021 | Journal of Mechanisms and Robotics, Vol. 13, No. 2
- Design of A Trans-Media Aircraft Morphing Wing Structure
- Deformation of Composite Laminates Induced by Surface Bonded and Embedded Piezoelectric Actuators
  17 July 2020 | Materials, Vol. 13, No. 14
- Design and analysis of a configuration-based lengthwise morphing structure
  Mechanism and Machine Theory, Vol. 147
- Numerical and experimental validation of a full scale servo-actuated morphing aileron model
  17 September 2018 | Smart Materials and Structures, Vol. 27, No. 10
- On the Experimental Characterization of Morphing Structures
- Bending moment tracking and the reduction of the axial stress in vibrating beams by piezoelectric actuation
  25 July 2017 | Acta Mechanica, Vol. 228, No. 11
- Real-time monitoring of a variable-camber aileron rib by original strain-angle transducer
  13 December 2015 | Journal of Intelligent Material Systems and Structures, Vol. 28, No. 8
- Dimensional Synthesis of a MultiLoop Linkage With Single Input Using Parameterized Curves
  9 March 2017 | Journal of Mechanisms and Robotics, Vol. 9, No. 2
- Stress tracking in thin bars by eigenstrain actuation
  Journal of Sound and Vibration, Vol. 383
- A Novel Actuator Controller: Delivering a Practical Solution to Realization of Active-Truss-Based Morphing Wings
  IEEE Transactions on Industrial Electronics, Vol. 63, No. 10
- Measurements of a Symmetric Wing Morphed by Macro Fiber Composite Actuators
  Marco T. Debiasi,
  Woei Leong Chan and
  Siddharth Jadhav
  2 January 2016
- Theoretical prediction and experimental verification of shape control of beams with piezoelectric patches and resistive circuits
  Composite Structures, Vol. 133
- Design of a scalable trailing edge of morphing wings
- Static and dynamic problem formulations for design optimization
  9 May 2014 | Structural and Multidisciplinary Optimization, Vol. 50, No. 5
- Measurements of a Symmetric Airfoil Morphed by Macro Fiber Composite Actuators
  Yann Bouremel,
  Woei Leong Chan,
  Gareth Jones and
  Marco T. Debiasi
  13 June 2014
- Static and dynamic shape control of slender beams by piezoelectric actuation and resistive electrodes
  Composite Structures, Vol. 111
- Structural design of morphing trailing edge actuated by SMA
  11 May 2013 | Frontiers of Mechanical Engineering, Vol. 8, No. 3
- Robust Modal Filtering for Control of Flexible Aircraft
  Peter M. Suh,
  Alexander Chin and
  Dimitri N. Mavris
  15 August 2013
- Deformation of the Upper and Lower Surfaces of an Airfoil by Macro Fiber Composite Actuators
  Marco T. Debiasi,
  Yann Bouremel,
  Zhenbo Lu and
  Varsha Ravichandran
  22 June 2013
- Modal Filtering for Control of Flexible Aircraft
  Peter Suh and
  Dimitri Mavris
  5 April 2013
- Optimal Orientations and Locations of Actuators and Sensors for Structural Shape Control, Using Intelligent Algorithms
- Morphing Airfoil Design for Minimum Drag and Actuation Energy Including Aerodynamic Work
  Howoong Namgoong ,
  William A. Crossley and
  Anastasios S. Lyrintzis
  28 August 2012 | Journal of Aircraft, Vol. 49, No. 4
- Design of a Morphing Airfoil with Composite Chiral Structure
  Alessandro Airoldi ,
  Marco Crespi ,
  Giuseppe Quaranti and
  Giuseppe Sala
  28 August 2012 | Journal of Aircraft, Vol. 49, No. 4
- Deformation of The Upper Surface of An Airfoil By Macro Fiber Composite Actuators
  Marco Debiasi,
  Yann Bouremel,
  Hock Hee Khoo and
  S.c. Luo
  6 September 2012
- Aircraft Roll Enhancement via Multi-Objective Optimization Using Surrogate Modeling
  Narcis M. Ursache ,
  Neil W. Bressloff and
  Andy J. Keane
  30 April 2012 | AIAA Journal, Vol. 49, No. 7
- Shape Change of the Upper Surface of an Airfoil by Macro Fiber Composite Actuators
  Marco Debiasi,
  Hock Hee Khoo,
  Yann Bouremel,
  S.c. Luo and
  Elvin Zhiwei
  10 August 2012
- Shape morphing of aircraft wing: Status and challenges
  Materials & Design, Vol. 31, No. 3
- The basis of optimal active(static and dynamic) shape- and stress-control by means of smart materials
- Preliminary study of an adaptive wing with shape memory alloy torsion actuators
  Materials & Design, Vol. 30, No. 10
- COUPLED ALGORITHMS FOR PIEZOELECTRIC ACTUATOR DESIGN OPTIMIZATION FOR SHAPE CONTROL OF SMART STRUCTURES
  20 November 2011 | International Journal of Computational Methods, Vol. 06, No. 04
- Direct Model Reference Adaptive Internal Model Controller using Perrin equation Adjustment Mechanism for DFIG Wind Farms
- Topology Optimization Approach for the Determination of the Multiple-Configuration Morphing Wing Structure
  Daisaku Inoyama ,
  Brian P. Sanders and
  James J. Joo
  22 May 2012 | Journal of Aircraft, Vol. 45, No. 6
- Shape optimization of geotextile tubes for sandy beach protection
  1 January 2008 | International Journal for Numerical Methods in Engineering, Vol. 74, No. 8
- Simultaneous optimization of control parameters and configurations of PZT actuators for morphing structural shapes
  Finite Elements in Analysis and Design, Vol. 44, No. 6-7
- Progress in Global Optimization and Shape Design
- Topology Synthesis of Distributed Actuation Systems for Morphing Wing Structures
  Daisaku Inoyama ,
  Brian P. Sanders and
  James J. Joo
  22 May 2012 | Journal of Aircraft, Vol. 44, No. 4
- Computational Design of Morphing Wing Structures through Multiple-Stage Optimization Process
  Daisaku Inoyama,
  Brian Sanders and
  James Joo
  18 June 2012
- Design of Postbuckled Spinal Structures for Airfoil Camber and Shape Control
  Narcis M. Ursache ,
  Andy J. Keane and
  Neil W. Bressloff
  2 May 2012 | AIAA Journal, Vol. 44, No. 12
- On the Design of Morphing Airfoils Using Spinal Structures
  Narcis Ursache,
  Andy Keane and
  Neil Bressloff
  19 June 2012
- Static shape control of repetitive structures integrated with piezoelectric actuators
  9 November 2005 | Smart Materials and Structures, Vol. 14, No. 6
- Static Shape and Vibration Control of Flexible Payloads With Applications to Robotic Assembly
  IEEE/ASME Transactions on Mechatronics, Vol. 10, No. 6
- Energy Optimization in Local Shape Control of Structures with Nonlinear Peizoelectric Actuators
  Dongchang Sun and
  Liyong Tong
  2 May 2012 | AIAA Journal, Vol. 43, No. 10
- Active robust shape control of flexible structures
  Mechatronics, Vol. 15, No. 7
- Computational aspects of structural shape control
  Computers & Structures, Vol. 83, No. 15-16
- Integrated Aeroservoelastic Design Optimization of Actively-Controlled Strain-Actuated Flight Vehicles
  Timothy Jackson and
  Eli Livne
  21 June 2012
- Static shape control of structures using nonlinear piezoelectric actuators with energy constraints
  7 August 2004 | Smart Materials and Structures, Vol. 13, No. 5
- Eigenstrain controlled deformation- and stress-states
  European Journal of Mechanics - A/Solids, Vol. 23, No. 1
- Optimum Control Voltage Design for Constrained Static Shape Control of Piezoelectric Structures
  Dongchang Sun and
  Liyong Tong
  17 May 2012 | AIAA Journal, Vol. 41, No. 12
- Future of Airplane Aeroelasticity
  Eli Livne
  22 May 2012 | Journal of Aircraft, Vol. 40, No. 6
- Active Robust Shape Control of Flexible Structures
  Yan-Ru Hu and
  George Vukovich
  26 June 2012
- Design and Implementation of a Shape Memory Alloy Actuated Reconfigurable Airfoil
  27 July 2016 | Journal of Intelligent Material Systems and Structures, Vol. 14, No. 4-5
- Shape and Stress Control in Elastic and Inelastic Structures
- A review on static and dynamic shape control of structures by piezoelectric actuation
  Engineering Structures, Vol. 24, No. 1
- An Exercise in Elementary Smart Structures
  12 November 2012 | International Journal of Mechanical Engineering Education, Vol. 30, No. 1
- Eigenstrain Without Stress and Static Shape Control of Structures
  Hans Irschik and
  Franz Ziegler
  17 May 2012 | AIAA Journal, Vol. 39, No. 10
- Adaptive wing and flow control technology
  Progress in Aerospace Sciences, Vol. 37, No. 7
- Integrated structure/actuation synthesis of strain actuated devices for shape control
  E. Forster and
  E. Livne
  22 August 2012
- Integrated design optimization of strain actuated structures for dynamic shape control
  E. Forster and
  E. Livne
  22 August 2012
- Controlled-motion models for wind tunnel unsteady aerodynamic loads identification on deforming configurations - A multidisciplinary challenge
  Eli Livne
  22 August 2012
- The Belt-Rib Concept: A Structronic Approach to Variable Camber
  18 September 2016 | Journal of Intelligent Material Systems and Structures, Vol. 11, No. 3
- Static shape control of smart beam plates laminated with sine sensors and actuators
  7 October 1999 | Smart Materials and Structures, Vol. 8, No. 5
- Static Shape Control of Smart Structures Using Compliant Mechanisms
  Laxminarayana Saggere and
  Sridhar Kota
  17 May 2012 | AIAA Journal, Vol. 37, No. 5
- Design optimisation using distributed evolutionary methods
  D. Doorly,
  J. Peiro and
  S. Spooner
  22 August 2012
- Adaptive Shape Control of Laminated Composite Plates Using Piezoelectric Materials
  S. Varadarajan ,
  K. Chandrashekhara and
  S. Agarwal
  17 May 2012 | AIAA Journal, Vol. 36, No. 9
- Smart materials and structures - a finite-element approach: a bibliography (1986-1997)
  1 January 1999 | Modelling and Simulation in Materials Science and Engineering, Vol. 6, No. 3
- Optimization of a realistic flap design for in-flight transonic performance enhancement
  M. Siclari and
  F. Austin
  22 August 2012
- Membrane Analogy for Sandwich Panels in Thermally or Piezoelectrically Induced Bending
- Aerodynamic Performance of an Airfoil with Step-Induced Vortex for Lift Augmentation
  Journal of Aerospace Engineering, Vol. 11, No. 1
- Adaptive Shape Control of Composite Beams with Piezoelectric Actuators
  27 July 2016 | Journal of Intelligent Material Systems and Structures, Vol. 8, No. 2
- Experimental and computational studies of flow developments around an airfoil with backward-facing steps
  Stephen Witherspoon and
  Fathi Finaish
  22 August 2012
- Adaptive shape control of laminated composite plates using piezoelectric materials
  S. Varadarajan,
  K. Chandrasgekhara and
  S. Agarwal
  22 August 2012
- The design of transonic airfoil sections for an adaptive wing concept using a stochastic optimization method
  M. Siclari,
  W. Van Nostrand and
  F. Austin
  22 August 2012
- A new procedure for airfoil definition
  P Venkataraman
  22 August 2012
- Optimum airfoil design in viscous flows
  P Venkataraman
  22 August 2012
- An Exact Solution for Static Shape Control Using Piezoelectric Actuation
What's Popular

Static shape control for adaptive wings

What's Popular