No Access

Static Shape Control of Smart Structures Using Compliant Mechanisms

Laxminarayana Saggere

University of Michigan, Ann Arbor, Michigan 48109

Search for more papers by this author

and

Sridhar Kota

University of Michigan, Ann Arbor, Michigan 48109

Search for more papers by this author

Published Online:17 May 2012https://doi.org/10.2514/2.775

See PDF for references

Cited by
- Slenderness tuning to adjust and regulate constant force mechanisms (STAR-CFM)
  Mechanism and Machine Theory, Vol. 186
- Dynamic Analysis of Cylindrical Shells with Flexoelectric Actuation
  Qiu Han,
  Deng Yan ,
  Fan Mu and
  Tzou Hornsen
  18 December 2022 | AIAA Journal, Vol. 61, No. 4
- Multi-Objective Reliability-Based Partial Topology Optimization of a Composite Aircraft Wing
  21 January 2023 | Symmetry, Vol. 15, No. 2
- Wind Tunnel Tests of 3D-Printed Variable Camber Morphing Wing
  9 November 2022 | Aerospace, Vol. 9, No. 11
- Computational design and experimental testing of a flexible bi-stable airfoil for passive flow control
  Anurag Bhattacharyya,
  Mark Bashkawi,
  Se Yeon Kim,
  Wanzheng Zheng,
  Theresa Saxton-Fox and
  Kai A. James
  28 July 2021
- Ground Structures-Based Topology Optimization of a Morphing Wing Using a Metaheuristic Algorithm
  19 August 2021 | Metals, Vol. 11, No. 8
- A variational formulation for motion design of adaptive compliant structures
  20 November 2020 | International Journal for Numerical Methods in Engineering, Vol. 122, No. 4
- On topology optimization of large deformation contact-aided shape morphing compliant mechanisms
  Mechanism and Machine Theory, Vol. 156
- Multifunctional Mesostructures: Design and Material Programming for 4D-printing
  5 November 2020
- Optimal Static Load Compensation With Fault Tolerance in Nonlinear Adaptive Structures Under Input and State Constraints
  15 September 2020 | Frontiers in Built Environment, Vol. 6
- Multi-objective optimization of a multi-field actuated, multilayered, segmented flexible composite beam
  23 December 2019 | Smart Materials and Structures, Vol. 29, No. 2
- Compliant Fluidic Control Structures: Concept and synthesis approach
  Computers & Structures, Vol. 216
- Design of a Bi-stable Airfoil with Tailored Snap-through Response Using Topology Optimization
  Computer-Aided Design, Vol. 108
- An origami-based design approach to self-reconfigurable structures using 4D printing technology
  Procedia CIRP, Vol. 84
- Model predictive control of piezo-actuated structures using reduced order models
  Control Engineering Practice, Vol. 80
- Shape memory composite cellular plan-forms for shape and area morphing
  7 November 2017 | ISSS Journal of Micro and Smart Systems, Vol. 6, No. 2
- An investigation of shape memory alloys as actuating elements in aerospace morphing applications
  8 November 2016 | Mechanics of Advanced Materials and Structures, Vol. 24, No. 8
- Topology Optimization of a Bi-Stable Airfoil Using Nonlinear Elasticity
  Anurag Bhattacharyya,
  Cian Conlan-Smith and
  Kai A. James
  2 June 2017
- Proportional fuzzy feed-forward architecture control validation by wind tunnel tests of a morphing wing
  Chinese Journal of Aeronautics, Vol. 30, No. 2
- Development of a new adaptive shape morphing compliant structure with embedded actuators
  16 June 2015 | Journal of Intelligent Material Systems and Structures, Vol. 27, No. 10
- Nonlinear Modelling of Axially Deformable Elastica based on Hyperelasticity
  Fang Jiang,
  Su Tian and
  Wenbin Yu
  1 January 2016
- Measurements of a Symmetric Wing Morphed by Macro Fiber Composite Actuators
  Marco T. Debiasi,
  Woei Leong Chan and
  Siddharth Jadhav
  2 January 2016
- Monito-Ring: An original fiber optic system for morphing application
  22 January 2015 | Journal of Intelligent Material Systems and Structures, Vol. 26, No. 18
- Control validation of a morphing wing in an open loop architecture
  Michel Joël Tchatchueng Kammegne,
  Duc-Hien Nguyen,
  Ruxandra M. Botez and
  Teordor L. Grigorie
  18 June 2015
- Morphing Wing Structural Optimization Using Opposite-Based Population-Based Incremental Learning and Multigrid Ground Elements
  Mathematical Problems in Engineering, Vol. 2015
- How far is smart rotor research and what steps need to be taken to build a full-scale prototype?
  16 December 2014 | Journal of Physics: Conference Series, Vol. 555
- Design of a scalable trailing edge of morphing wings
- On morphing wing for roll augmentation via material fitness using surrogate modelling
  23 September 2014 | European Journal of Computational Mechanics, Vol. 23, No. 3-4
- Measurements of a Symmetric Airfoil Morphed by Macro Fiber Composite Actuators
  Yann Bouremel,
  Woei Leong Chan,
  Gareth Jones and
  Marco T. Debiasi
  13 June 2014
- Aircraft morphing wing design by using partial topology optimization
  12 June 2013 | Structural and Multidisciplinary Optimization, Vol. 48, No. 6
- A high-rate shape memory alloy actuator for aerodynamic load control on wind turbines
  4 March 2013 | Journal of Intelligent Material Systems and Structures, Vol. 24, No. 15
- Multidisciplinary design optimization of adaptive wing leading edge
  20 May 2013 | Science China Technological Sciences, Vol. 56, No. 7
- CARAPACE: A novel composite advanced robotic actuator powering assistive compliant exoskeleton preliminary design
- New conceptual design of aeroelastic wing structures by multi-objective optimization
  Engineering Optimization, Vol. 45, No. 1
- A compliant mechanism kit with flexible beams and connectors along with analysis and optimal synthesis procedures
  Mechanism and Machine Theory, Vol. 49
- Optimal design of non intuitive compliant microgripper with high resolution
- A Two-Level Approach for the Optimal Design of Morphing Wings Based On Compliant Structures
  17 August 2011 | Journal of Intelligent Material Systems and Structures, Vol. 22, No. 10
- Shape Change of the Upper Surface of an Airfoil by Macro Fiber Composite Actuators
  Marco Debiasi,
  Hock Hee Khoo,
  Yann Bouremel,
  S.c. Luo and
  Elvin Zhiwei
  10 August 2012
- Morphing Aircraft Sizing Using Design Optimization
  William A. Crossley ,
  Michael D. Skillen ,
  Joshua B. Frommer and
  Brian D. Roth
  22 May 2012 | Journal of Aircraft, Vol. 48, No. 2
- Effect of Actuating Forces on Aeroelastic Characteristics of a Morphing Aircraft Wing
  1 March 2011 | Applied Mechanics and Materials, Vol. 52-54
- Shape morphing of aircraft wing: Status and challenges
  Materials & Design, Vol. 31, No. 3
- Design of compliant mechanisms with selective compliance
  15 September 2009 | Smart Materials and Structures, Vol. 18, No. 11
- Design of Adaptive and Controllable Compliant Systems With Embedded Actuators and Sensors
  6 October 2009 | Journal of Mechanical Design, Vol. 131, No. 11
- Pneumatic Artificial Muscles for Aerospace Applications
  Norman Wereley,
  Curt Kothera,
  Edward Bubert,
  Benjamin Woods,
  Michael Gentry and
  Robert Vocke
  14 June 2012
- Determinate structures for wing camber control
  3 February 2009 | Smart Materials and Structures, Vol. 18, No. 3
- Optimal Location of Distributed Actuators within an In-plane Multi-cell Morphing Mechanism
  3 September 2008 | Journal of Intelligent Material Systems and Structures, Vol. 20, No. 4
- Mechanical and Control-Oriented Design of a Monolithic Piezoelectric Microgripper Using a New Topological Optimization Method
  IEEE/ASME Transactions on Mechatronics, Vol. 14, No. 1
- Optimization of Smart Structure for Improving Servo Performance of Hard Disk Drive
  Journal of System Design and Dynamics, Vol. 3, No. 6
- Optimal Design of Compliant Trailing Edge for Shape Changing
  Chinese Journal of Aeronautics, Vol. 21, No. 2
- Kinematic Synthesis of Planar, Shape-Changing Rigid-Body Mechanisms
  4 February 2008 | Journal of Mechanical Design, Vol. 130, No. 3
- Design Optimization of a Controllable Camber Rotor Airfoil
  Farhan Gandhi ,
  Mary Frecker and
  Andrew Nissly
  2 May 2012 | AIAA Journal, Vol. 46, No. 1
- Vibration Control of Smart Structures with Dynamic Characteristic Variation
  Journal of System Design and Dynamics, Vol. 2, No. 1
- Aerodynamic Optimization of a Morphing Airfoil Using Energy as an Objective
  Howoong Namgoong ,
  William A. Crossley and
  Anastasios S. Lyrintzis
  2 May 2012 | AIAA Journal, Vol. 45, No. 9
- Modeling and Flight Control of Large-Scale Morphing Aircraft
  Thomas M. Seigler ,
  David A. Neal ,
  Jae-Sung Bae and
  Daniel J. Inman
  22 May 2012 | Journal of Aircraft, Vol. 44, No. 4
- Demonstration of optimizing piezoelectric polarization in the design of a flextensional actuator
  21 October 2006 | Structural and Multidisciplinary Optimization, Vol. 33, No. 6
- Negative Poisson’s ratio structures produced from zirconia and nickel using co-extrusion
  30 November 2006 | Journal of Materials Science, Vol. 42, No. 4
- Design of Postbuckled Spinal Structures for Airfoil Camber and Shape Control
  Narcis M. Ursache ,
  Andy J. Keane and
  Neil W. Bressloff
  2 May 2012 | AIAA Journal, Vol. 44, No. 12
- Building Surrogate Models for Capability-Based Evaluation: Comparing Morphing and Fixed Geometry Aircraft in a Fleet Context
  Joshua Frommer and
  William Crossley
  15 June 2012
- Topology and Dimensional Synthesis of Compliant Mechanisms Using Discrete Optimization
  30 October 2005 | Journal of Mechanical Design, Vol. 128, No. 5
- Dynamic Modeling of Large-Scale Morphing Aircraft
  Thomas Seigler,
  David Neal and
  Daniel Inman
  19 June 2012
- Design and fabrication of a micro-compliant amplifier with a topology optimal compliant mechanism integrated with a piezoelectric microactuator
  6 February 2006 | Journal of Micromechanics and Microengineering, Vol. 16, No. 3
- Aerodynamic Optimization of a Morphing Airfoil Using Energy as an Objective
  Howoong Namgoong,
  William Crossley and
  Anastasios Lyrintzis
  21 June 2012
- Integrated Multidisciplinary Topology Optimization Approach to Adaptive Wing Design
  K. Maute and
  G. W. Reich
  22 May 2012 | Journal of Aircraft, Vol. 43, No. 1
- Static Shape and Vibration Control of Flexible Payloads With Applications to Robotic Assembly
  IEEE/ASME Transactions on Mechatronics, Vol. 10, No. 6
- Evaluating Morphing Aircraft in a Fleet Context Using Non-Deterministic Metrics
  Josh Frommer and
  William Crossley
  19 June 2012
- Design of a Comfortable Rotor Airfoil Using Distributed Piezoelectric Actuators
  Phuriwat Anusonti-Inthra ,
  Roberto Sarjeant ,
  Mary Frecker and
  Farhan Gandhi
  2 May 2012 | AIAA Journal, Vol. 43, No. 8
- Optimal design of smart carriage arm in magnetic disk drive for vibration suppression
  7 July 2005 | Microsystem Technologies, Vol. 11, No. 8-10
- Synthesis of Compliant Mechanisms for Path Generation using Genetic Algorithm
  29 September 2004 | Journal of Mechanical Design, Vol. 127, No. 4
- An Effective Method of Synthesizing Compliant Adaptive Structures using Load Path Representation
  27 July 2016 | Journal of Intelligent Material Systems and Structures, Vol. 16, No. 4
- Enabling Continuous Optimization for Sizing Morphing Aircraft Concepts
  Joshua Frommer and
  William Crossley
  21 June 2012
- Optimal design of a cam-flexure clamp
  Finite Elements in Analysis and Design, Vol. 40, No. 9-10
- Static shape control employing displacement–stress dual criteria
  6 April 2004 | Smart Materials and Structures, Vol. 13, No. 3
- An Aeroelastic Topology Optimization Approach for Adaptive Wing Design
  Kurt Maute and
  Gregory Reich
  26 June 2012
- Aerodynamic Performance of the Smart Wing Control Effectors
  27 July 2016 | Journal of Intelligent Material Systems and Structures, Vol. 15, No. 4
- Freeform Skeletal Shape Optimization of Compliant Mechanisms
  11 June 2003 | Journal of Mechanical Design, Vol. 125, No. 2
- Design of Compliant Mechanisms for Morphing Structural Shapes
  27 July 2016 | Journal of Intelligent Material Systems and Structures, Vol. 14, No. 6
- Synthesis for Mechanical Behavior
- Use of Design Methods to Generate and Develop Missions for Morphing Aircraft
  Christopher Peters,
  Brian Roth,
  William Crossley and
  Terrence Weisshaar
  26 June 2012
- An Exercise in Elementary Smart Structures
  12 November 2012 | International Journal of Mechanical Engineering Education, Vol. 30, No. 1
- Integrated wing design with adaptive control surfaces
  Joseph Henderson,
  Terrence Weisshaar and
  Brian Sanders
  22 August 2012
- Design of shape and control system for smart structures with piezoelectric films
  Itsuro Kajiwara and
  Manabu Uehara
  22 August 2012
- Integrated structure/actuation synthesis of strain actuated devices for shape control
  E. Forster and
  E. Livne
  22 August 2012
- Integrated design optimization of strain actuated structures for dynamic shape control
  E. Forster and
  E. Livne
  22 August 2012
- Controlled-motion models for wind tunnel unsteady aerodynamic loads identification on deforming configurations - A multidisciplinary challenge
  Eli Livne
  22 August 2012
- Vibration Control of Hard Disk Drive with Smart Structure Technology for Improving Servo Performance
What's Popular

Static Shape Control of Smart Structures Using Compliant Mechanisms

What's Popular